I've bought a used Jobo CPE2 with a lift. This setup can develop 5 films at a time. Chemicals are stored in bottles in the waterbath. I use it at room temperature 20-24°C for b+w films (135/120). I used it also for C-41 but it takes quite some time to heat up to 38°C, so I would rather empty the CPE and fill it with 40°C water and use the heatcontrol to keep it at 38°C.(posted 8570 days ago)Only problem, it became noisy after a while so I added some water resistant ball bearing grease to the outer gears.
Regards,
Wolfram