Milky negatives

I recently processed a couple of rolls of Tri-X in FG-7, 1:15, no sulfite. The density looks pretty good, but there is a "milkiness" between many of the frames, and also running above the sprockets in some places. I believe I made fresh fixer just before I processed this film. I inverted continuously for the first 30 seconds, and three times each minute for the rest of the development. I twisted the tank as I inverted for the first 30 seconds, but just tipped it over and back for the remaining time. I fixed for 5 minutes, agitating 3 times per minute. Any thoughts?

[ Previous | Next ]