Final Soak In PMKgreenspun.com : LUSENET : B&W Photo - Film & Processing : One Thread |
What is the purpose of the final, post-processing, bath in the original Pyro Developer?
-- Bill Mitchell (bmitch@home.com), March 12, 2001
To increase the stain. If I remember right, a soak in alkaline solution increases the stain. Since the used developer fills the pH requirements, and is readily available, it makes more sense than having a separate solution.
-- Charlie Strack (charlie_strack@sti.com), March 12, 2001.
Does it stain the entire negative uniformly, or is there a differential stain in the areas of reduced silver?
-- Bill Mitchell (bmitch@home.com), March 12, 2001.
According to Hutchings, PMK does not stain during development, but only afterward, and the staining action is enhanced by an alkaline environment. I find that most of my staining takes place during the water bath I use for a stop, though I still put the film back in the developer for a couple of minutes after I fix it. When I used an acid stop, the staining took place during the final soak in the used developer. I definitely get better stain without the acid stop. Stain is directly proportional to silver in the developed negative.
-- Ed Buffaloe (edb@unblinkingeye.com), March 12, 2001.
Wonder if it could be used that way to stain negatives processed in other developers?
-- Bill Mitchell (bmitch@home.com), March 13, 2001.
My experience is that if you use a water stop and an alkaline fixer (like TF-4 from Photographers' Forumulary), you don't need the developer afterbath. PMK creates a "latent" image stain during the developing process that an alkaline solution makes visible afterward.
-- Brian Hinther (BrianH@sd314.k12.id.us), March 13, 2001.
There is an article in Photo Techniques from a few months back on bleaching conventional negatives and redeveloping them in a pyro developer to get stain. It CAN be done.
-- Ed Buffaloe (edb@unblinkingeye.com), March 13, 2001.