Does anyone out there know if you need special service tool, software, fast tool, etc..., to work on a dover T-3. Thinking about taking one on service but dont want to get stuck on trouble call without ability to trouble shoot. thanks

-- tj (elevatetj@comcast.net), February 12, 2004

Answers

A tandy 100, 150, or 200 (available from ebay) works fine with the program initilized.

-- cliff (cliff77@att.net), February 13, 2004.

we would probably be able to help you with parts and some technical support. the company i work for is parts specialists inc. my number is 1-800-598-2444.

-- tom przybyla (partspec@flash.net), February 19, 2004.

Any laptop with 95,98,2000,XP OS in hyper terminal mode at 1200 baud rate will give u a command promt . lowest pass word level is "dover III" dont for get a space after dover.

-- fishing (tkeelevator@hotmail.com), March 14, 2004.

T-3

The easy part is getting in but you still need the fault code book. You may want to stay with bidding on relay logic controllers is you don't have that type of talent at your shop. PS you will also need the I/O location pages. Good luck!

-- (nofear971@hotmail.com), April 05, 2004.